Tel: 01904 401709

Shop

  • Sale
    Scout (Oink Games)
    Scout (Oink Games)

    Scout (Oink Games)

    , ,
    SCOUT is a ladder-climbing game in which cards have two potential values, players may not rearrange their hand of cards, and players may pass their turn to take a card from the current high set of cards into their hand. More specifically, cards are dual-indexed, with different values on each half of the card, with the 45 cards having all possible combinations of the numbers 1-10. During set-up, whoever is shuffling the cards should randomize both the order of the cards in the deck and their orientation. Once each player has been dealt their entire hand of cards, they pick up that hand without rearranging any of the cards; if they wish, they can rotate their entire hand of cards in order to use the values on the other end of each card, but again they cannot rearrange the order of cards in their hand. On a turn, a player takes one of two actions: Play: A player chooses one or more adjacent cards in their hand that have all the same value or that have values in consecutive order (whether ascending or descending), then they play this set of cards to the table. They can do this only if the table is empty (as on the first turn) or the set they're playing is ranked higher than the set currently on the table; a set is higher if it has more cards or has cards of the same value instead of consecutive cards or has a set of the same quantity and type but with higher values. In this latter case when a player overplays another set, the player captures the cards in this previous set and places them face down in front of themselves. Scout: A player takes a card from either end of the set currently on the table and places it anywhere they wish in their hand in either orientation. Whoever played this previous set receives a 1 VP token as a reward for playing a set that wasn't beaten. Once per round, a player can scout, then immediately play. When a player has emptied their hand of cards or all but one player have scouted instead of playing, the round ends. Players receive 1 VP for each face-down card, then subtract one point for each card in their hand (except if they were the player scouted repeatedly to end the game). Play as many rounds as the number of players, then whoever has the most points wins.
    Original price was: £20.00.Current price is: £16.00.
  • Sale
    Akropolis Athena Expansion
    Akropolis Athena Expansion

    Akropolis: Athena Expansion

    ,
    Akropolis Athena is an expansion of the Akropolis base game, set in the Ancient Mediterranean where architects compete to build prestigious cities. The theme revolves around gaining the favor of Athena, the goddess of wisdom, war, and artisans, to earn riches and honor. In this game, players must use their skills to complete specific Construction cards by building layouts within their cities that match the cards. As players complete these cards, they can acquire parts of the Statue of Athena and gain Mini-tiles to enhance their cities. The goal is to strategically build your city while completing these Construction cards to gain additional points and advantages. The game integrates the core rules of the Akropolis base game with the added challenge of completing Construction cards. Each architect can complete each Construction card only once and must manage their resources and placements carefully to maximize their points. The game concludes when there is only one tile left in the Construction Site and all the stacks have been used. Points are counted as usual, but players who have completed the Statue of Athena gain extra points for their Stones, adding a layer of strategic depth to the gameplay. The ultimate goal is to have the most prestigious city by the end of the game, as determined by the accumulated points.
    Original price was: £12.95.Current price is: £10.25.
  • Sale
    Seaside board game
    Seaside board game

    Seaside Board Game

    Seaside is a game that features only wooden tokens, and being lightweight and super portable, can be played everywhere. Bring it along on your next adventure! The sun is shining, as a light, salty wind sends cottony clouds scudding across the sky. Sandpipers filling their bellies with strange insects, crabs hiding under piles of rocks, seashells washed up on the sand, curling waves that break along the beach. Nature in its simplest beauty. One token at a time, create your Seaside with the elements the sea sends your way. The goal of the game is to have the highest stack of tokens. How to play: Put all tokens in the Bag and mix them up. The Play area is divided into 2 spaces: The sea (central area) and the Seaside (area in front of each player) On your turn, draw a token from the Bag, look at it secretly, choose the side that interests you and apply its effect. Once you have chosen the side of the token you'd like to play, it will remain like that for the rest of the game. Once you've applied the token's effect, your turn is over; pass the Bag to the player on your left. There are two types of tokens: Tokens with a blue design are thrown into the sea & tokens with a white design are placed on your Seaside If you pick a token with a blue design and throw it into the sea, you immediately take another turn. Your turn ends when you pick a token with a white design and put it on your Seaside. The key to the game lies in the interaction among the various elements of Seaside’s ecosystem. The Sandpiper allows you to fetch Isopods from the Sea. The more Beaches you have, the more Shells you can collect from the Sea. Having one Rock does nothing, but the second one you place allows you to collect all the Crabs from the Sea... and even steal one from another player! Finally, Waves wash across the Beach tiles and flip them over. As soon as the bag is empty, the game is over. Stack up all the tokens from your Seaside, and the player with the highest stack wins!
    Original price was: £25.00.Current price is: £19.99.
  • Sale
    Wednesday: Creatures and Outcasts (Card Game)
    Wednesday: Creatures and Outcasts (Card Game)

    Wednesday: Creatures and Outcasts (Card Game)

    When you inadvertently end up in the Nightshade Library, your uncontrollable curiosity drives you towards the many books in the enormous bookcases that surround you. Your attention is drawn to book after book as you scan the pages about different kinds of outcasts and creatures. But then, suddenly, a small book catches your eye. Its title: "Rulebook, Creatures and Outcasts". When you carefully slide the book towards you from the dusty bookcase, cards fall out. It appears to be an ancient card game about mythical creatures and outcasts. You quickly open the rulebook and begin to read... In Wednesday: Creatures & Outcasts, 2-6 players play cards on a stack. Each card played needs to be higher than the previous one, and all cards left in your hand when the round ends count as penalty points. Outsmart your opponents by getting rid of the cards you hold as quickly as possible. Should you wait for the right moment to play your highest cards, or take a risk and face major consequences? Stay alert because well-known characters from Wednesday will keep you on your toes. After all, what is a game without some unexpected twists? After five rounds, the player with the best score wins.
    Original price was: £15.00.Current price is: £11.99.
  • New
    Innistrad Remastered Launch Party: Magic the Gathering - Friday 24th January
    Innistrad Remastered Launch Party: Magic the Gathering - Friday 24th January

    Innistrad Remastered Launch Party: Magic the Gathering – Friday 24th January

    , ,
    Return to the plane of glorious gothic horror and dig up fan-favorite reprints from every Innistrad set ever made with Innistrad Remastered. Cackle with delight at Showcase treatments from Innistrad’s past and behold all-new borderless art that’s hauntingly boo-tiful. Plus, every booster arrives nostalgia-packed with a Retro frame card! To celebrate the launch of Innistrad Remastered we are running a Launch Party which will be a booster draft event using the brand new Innistrad Remastered packs and every participant will also receive a Deadeye Navigator promo card. We will dig up some other prizes also to give out on the night... Registration: 6pm to 6.15pm Draft: 6.15 - 7pm Round One: 7pm We expect to finish around 10pm and this is a great format for new and experienced players alike. NB: Tickets must be pre-booked and there will be no room for walk-ins on the night.
    £18.50
  • New
    Aetherdrift Prerelease in York: Magic the Gathering - Friday 7th February
    Aetherdrift Prerelease in York: Magic the Gathering - Friday 7th February

    Aetherdrift Prerelease in York: Magic the Gathering – Friday 7th February

    , ,
    Start your engines for a high-octane death race across the Multiverse! Swerve through three planes of mayhem, dodging dangerous obstacles and rival racers along the way. Crew up unique vehicles and mounts as you discover which racing team best suits your style, then hit max speed to claim the gold. Join us on Friday 7th February for a Prerelease evening to see in this latest Magic the Gathering set. Registration: 6pm to 6.15pm Deck-Building: 6.15 - 7pm Round One: 7pm We expect to finish around 10.30pm

    You will receive a Prerelease kit and two extra bonus Aetherdrift booster packs (that's 8 packs in total!). The Prerelease kit contains 6 booster packs and a foil promo card along with a spindown dice life counter. Players open the Prerelease Pack booster, build a 40-card Sealed deck from the cards contained within, and try out the new cards for the first time in a casual tournament.

    This is a great format for new and experienced players alike.
    £28.50
  • Sale
    Maskmen (Oink Games)
    Maskmen (Oink Games)

    Maskmen (Oink Games)

    , ,
    Original price was: £20.00.Current price is: £16.00.
  • Sale
    Monkey Palace (Lego Board Game)
    Monkey Palace (Lego Board Game)

    Monkey Palace (Lego Board Game)

    ,
    Build your way to victory brick by brick. A long time ago, an impressive palace was erected in the Jungle. It lay abandoned for many years, until a monkey moved in. One day the Monkey accidently removed a brick from the palace and the whole palace collapsed! Now it’s up to all of you to rebuild the Monkey Palace. Compete against each other while you help the Monkey rebuild the LEGO® Monkey Palace in this innovative and strategic building board game. Build a staircase for the Palace, count your Monkey Credits, take Monkey Cards and score Banana Points. The winner is the player with the most Banana Points! With no single route to victory, you’ll always want to play again!
    Original price was: £34.99.Current price is: £28.50.
  • Sale
    The Fellowship of the Ring Trick-Taking Game
    The Fellowship of the Ring Trick-Taking Game

    The Fellowship of the Ring: Trick-Taking Game

    , ,
    Follow the key story beats of the iconic fantasy tale by J. R. R. Tolkien, starting with Bilbo Baggins’ Eleventy-First birthday party in Bag End. Players are taken through eighteen total chapters chronologically, focusing on big story moments and the beloved literary characters among them. Each chapter introduces new challenges, characters, and items; slowly revealing cards that build toward the forming of The Fellowship. Story cards are used at the beginning of each chapter, featuring actual text from the book, to set the mood as you begin your adventure. Middle-earth awaits...
    Original price was: £24.99.Current price is: £20.99.
  • New
    Star Wars Unlimited: York Store Showdown - January 18th 2025
    Star Wars Unlimited: York Store Showdown - January 18th 2025

    Star Wars Unlimited: York Store Showdown – January 18th 2025

    ,
    Welcome to our Twilight of the Republic Star Wars Unlimited Store Showdown event at EH Gaming in York... Saturday January 18th is the date and we hope to see you there - here are the details: Registration: 12pm Round One: 12.30pm This will be a Standard Swiss format Tournament over 4 or 5 rounds, depending on number of participants. Each round will last 55 minutes and play to a 'Best of 3 games' format. We expect to finish around 6pm. There will be no top cut at this event. You will need to bring two copies of a completed decklist with you, or an electronic copy can be emailed to the store ahead of the event. Prizes: The prize structure is as follows: 1st Place = 1 x Gor Champion, Finalist, Top 4 & Top 8 Trophy Cards & 6 x Star Wars Unlimited Booster Packs 2nd Place = 1 x Gor Finalist, Top 4 & Top 8 Trophy Cards & 4 x Star Wars Unlimited Booster Packs 3rd & 4th Place = 1 x Gor Top 4 & Top 8 Trophy Cards & 3 x Star Wars Unlimited Booster Packs 5th to 8th Place = 1 x Gor Top 8 Trophy Card & 2 x Star Wars Unlimited Booster Packs Every participant will receive a special 'Savage Opress' Store Showdown exclusive promo card. If the event sells out please contact us to be placed on the waiting list.
    £8.99
  • EH Gaming 2025 Membership
    EH Gaming 2025 Membership

    EH Gaming 2025 Full Membership

    , , ,
    Regular visitors to our physical store and playspace will benefit significantly by joining the EH Gaming Membership Scheme which is now open for 2025 and January is the best value month to join... Membership lasts until the end of the year (midnight, 31st December) and works out at a maximum of just £3 a month in total. The amount you pay depends on the month you join - see details further down this page. The following benefits are guaranteed for 2025 Full Members:
    • Pay £2.50 instead of £3.50 for our regular gaming sessions (no limit on usage)
    • Early access to ticketed events as well as discounts off ticket prices
    • Discounts on food & drinks
    • Member-Only discounts on selected gaming & hobby products in-store
    • First allocation for limited pre-order products
    • Other benefits may be added through the year as we think of them :)
    You even receive a printed membership card...what a time to be alive! Please get in touch if you have any questions about our Membership Scheme.
    £25.00
  • 6 Lance Cavalry Movement Tray - 3D Printed Wargame Miniature Bases

    6 Lance Cavalry Movement Tray – 3D Printed Wargame Miniature Bases

    , ,
    Price shown is for a single 6 Lance Cavalry Movement Tray These 6-lance cavalry movement trays are perfect for many different wargames and will be particularly useful for armies in Warhammer: The Old World. Full external size of tray is 94.4mm x 184.4mm x 4mm. It holds six 30mm x 60mm bases or 30mm x 60mm convertor bases perfectly. Height of tray is 4mm. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniatures and bases shown in tray are not included and pictured just for reference. Movement tray may be supplied to you in either grey or black colour.
    £1.99
  • 100mm x 150mm 3D Printed Wargame Miniature Base

    100mm x 150mm 3D Printed Wargame Miniature Base (1pk)

    , ,
    Price shown is for a single 100mm x 150mm base These 100mm x 150mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £2.49
  • 60mm x 100mm 3D Printed Wargame Miniature Base

    60mm x 100mm 3D Printed Wargame Miniature Base (1pk)

    , ,
    Price shown is for a single 60mm x 100mm base These 60mm x 100mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £0.99
  • 50mm x 100mm 3D Printed Wargame Miniature Base

    50mm x 100mm 3D Printed Wargame Miniature Base (1pk)

    , ,
    Price shown is for a single 50mm x 100mm base These 50mm x 100mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £0.95
  • 50mm x 75mm 3D Printed Wargame Miniature Bases

    50mm x 75mm 3D Printed Wargame Miniature Bases (2pk)

    , ,
    Price shown is for a pack of 2 bases These 50mm x 75mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £1.75
  • 40mm x 60mm 3D Printed Wargame Miniature Bases

    40mm x 60mm 3D Printed Wargame Miniature Bases (3pk)

    , ,
    Price shown is for a pack of 3 bases These 40mm x 60mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £1.50
  • 30mm x 60mm 3D Printed Wargame Miniature Bases
    30mm x 60mm 3D Printed Wargame Miniature Bases

    30mm x 60mm 3D Printed Wargame Miniature Bases (6pk)

    , ,
    Price shown is for a pack of 6 bases These 30mm x 60mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £1.95
  • 25mm x 50mm 3D Printed Wargame Miniature Bases
    25mm x 50mm 3D Printed Wargame Miniature Bases

    25mm x 50mm 3D Printed Wargame Miniature Bases (6pk)

    , ,
    Price shown is for a pack of 6 bases These 25mm x 50mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £1.75
  • 50mm x 50mm Square 3D Printed Wargame Miniature Bases

    50mm x 50mm Square 3D Printed Wargame Miniature Bases (3pk)

    , ,
    Price shown is for a pack of 3 bases These 50mm x 50mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £1.75
  • 40mm x 40mm Square 3D Printed Wargame Miniature Bases

    40mm x 40mm Square 3D Printed Wargame Miniature Bases (5pk)

    , ,
    Price shown is for a pack of 5 bases These 40mm x 40mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £1.49
  • 30mm x 30mm Square 3D Printed Wargame Miniature Bases
    30mm x 30mm Square 3D Printed Wargame Miniature Bases

    30mm x 30mm Square 3D Printed Wargame Miniature Bases (5pk)

    , ,
    Price shown is for a pack of 5 bases These 30mm x 30mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £0.99
  • 25mm x 25mm Square 3D Printed Wargame Miniature Bases
    25mm x 25mm Square 3D Printed Wargame Miniature Bases

    25mm x 25mm Square 3D Printed Wargame Miniature Bases (5pk)

    , ,
    Price shown is for a pack of 5 bases These 25mm x 25mm bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World. Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £0.95
  • 25x50mm to 30x60mm Conversion Bases - 3D Printed Wargame Miniature Bases

    25x50mm to 30x60mm Conversion Bases – 3D Printed Wargame Miniature Bases (3pk)

    , ,
    Price shown is for a pack of 3 bases Use these bases to convert your old 25mm x 50mm based miniatures to 30mm x 60mm bases without having to break them off and stick them onto new bare bases! Simply glue your existing 25x50mm based model(s) into the conversion base or place them in and extend your basing material to cover over the gaps to make them look neat and keep the model in place. These conversion bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World, especially if you have a lot of old Warhammer Fantasy models on 25x50mm bases! Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £0.95
  • 20mm to 25mm Square Conversion Bases - 3D Printed Wargame Miniature Bases

    20mm to 25mm Square Conversion Bases – 3D Printed Wargame Miniature Bases (5pk)

    , ,
    Price shown is for a pack of 5 bases Use these bases to convert your old 20mm based miniatures to 25mm bases without having to break them off and stick them onto new bare bases! Simply glue your existing 20mm based model into the conversion base or place them in and extend your basing material to cover over the gaps to make them look neat and keep the model in place. These conversion bases are perfect for many different wargames and will be particularly useful for Warhammer: The Old World, especially if you have a lot of old Warhammer Fantasy models on 20mm bases! Our wargaming bases are 3D printed to order on high quality Bambu P1S PLA printers and offer strength with a textured finish. NB: Miniature shown is not included and just for reference. Bases may be supplied in either grey or black colour.
    £0.99
  • Sold out
    Bolt Action Germany Flakpanzer IV Ostwind
    Bolt Action Germany Flakpanzer IV Ostwind

    Bolt Action: Germany Flakpanzer IV Ostwind

    , ,
    Enforce a no-fly zone over the Bolt Action battlefield! A modification of the ubiquitous Panzer IV chassis, the Ostwind anti-aircraft vehicle served in the final months of the Second World War. 44 were produced by marrying the Panzer IV hull and running gear with a single 37mm automatic cannon in a hexagonal, open-topped turret, and the design was intended to provide more effective mobile anti-aircraft fire than its Wirbelwind predecessor. Heavy autocannon are a lethal weapon on the Bolt Action tabletop, particularly when combined with the mobility and protection of a tank! A great choice for any late-war German Armoured Platoon, the Ostwind is capable of punishing enemy infantry, light vehicles, and aircraft alike! Targets sighted - open fire!
    Original price was: £32.00.Current price is: £25.60.
  • Sale
    Bolt Action Kangaroo APC Priest
    Bolt Action Kangaroo APC Priest

    Bolt Action: Kangaroo APC (Priest)

    , ,
    Get your British and Canadian infantry moving in style! Developed by Canadian engineers in Normandy from the M7 Priest self-propelled gun by the simple expedient of removing the gun and adding some extra armour plating, the Priest Kangaroo was designed to carry infantry right into combat while providing them significantly more protection than a lorry or half-track. A fantastic option for any British Bolt Action player in need of armoured transports for their Rifle Platoons (or indeed any Platoon that needs to go somewhere dangerous!), the Priest Kangaroo combines good carrying capacity with decent armour, and can also lay down some supporting fire, courtesy of the pintle-mounted heavy machine gun! Infantry, mount up!
    Original price was: £28.00.Current price is: £22.40.
  • Sale
    Bolt Action Germany Fallschirmjäger HQ (Winter)
    Bolt Action Germany Fallschirmjäger HQ (Winter)

    Bolt Action: Germany Fallschirmjäger HQ (Winter)

    , ,
    Get some leadership for your Fallschirmjäger today! Fallschirmjäger officers underwent the same rigorous training as the men they commanded, and some of the best combat leaders in the German military came from the ranks of the paratroopers. Accompanied by other specialists, they were a vital part of the Fallschirmjäger in battle. Officers, medics, and spotters are an essential part of any Bolt Action collection, supporting their troops with both leadership and powerful special abilities. Every Platoon needs a commander, and this set provides you with a pair, both clad in thick winter gear. One surveys the battlefield through a cloud of cigar smoke, while the other directs his men into the heat of battle, ready to lead them to victory. Alongside them, a medic tends to a wounded comrade, while a forward observer gets on the radio to call down air or artillery support. Lead from the front today!
    Original price was: £11.50.Current price is: £9.20.
  • Sale
    Bolt Action Germany Fallschirmjäger Weapons Teams (Winter)
    Bolt Action Germany Fallschirmjäger Weapons Teams (Winter)

    Bolt Action: Germany Fallschirmjäger Weapons Teams (Winter)

    , ,
    Deploy specialist firepower to support your Fallschirmjäger! Well-supplied and trained in the use of a wide selection of weaponry, the Fallschirmjäger paratroopers who fought in the bitter wintry conditions of the Ardennes made good use of a large range of infantry support weapons, both in attack and defence. This box provides you with three infantry weapons teams to reinforce your Bolt Action Fallschirmjäger collection, all clad in thick winter kit. A lethal Panzerschreck anti-tank launcher menaces Allied armour, while a flamethrower team, the backbone of Engineer Platoons, stands ready to incinerate anything before them. Supporting both from afar is the sniper team, armed with a unique scoped variant of the FG 42 paratrooper’s rifle, the bane of enemy officers! Bring up the specialists today!
    Original price was: £16.00.Current price is: £12.80.
  • Sale
    Bolt Action Germany Fallschirmjäger Heavy Weapons Platoon (Winter)
    Bolt Action Germany Fallschirmjäger Heavy Weapons Platoon (Winter)

    Bolt Action: Germany Fallschirmjäger Heavy Weapons Platoon (Winter)

    , ,
    Support your Fallschirmjäger with heavy firepower! Benefiting from their inclusion in the Luftwaffe supply system, the Fallschirmjäger paratroopers were well-supplied with supporting weaponry, particularly later in the war when they found themselves fighting as conventional light infantry, such as in the wintry conditions during the Battle of the Bulge. This box gives you everything you need to add a Fallschirmjäger Heavy Weapons Platoon to your German Bolt Action collection, in their iconic winter uniforms. A pair of legendary MG 42s provide deadly direct-fire support in their medium machine gun configuration, while the 81mm medium mortar rains high explosives in lethal arcs. Leading them is their Platoon Commander, vitally important both on the tabletop and in the army list! Bring those heavy weapons up now!
    Original price was: £37.00.Current price is: £29.60.